Use and maintenance manual
Rev: 0
Page 14 of 24
Date: 30.04.2019
8
Power level signal LED
9
Handpiece error signal
10
Pump error signal
11
Antifreeze fluid temperature signal
12
Inductor
13
Heating start button
14
Flow concentrator
Instructions for KB membrane keypad use
Turn the main switch (4) to ON position. The machine checks the system and prepares to
work, then wait a few seconds.
Use the buttons (6) to select the desired power level. These levels are shown by the power
level indicators (8, see
Figure 3
).
Place the flow concentrator on the part to be heated (
Figure 5
) and press the heating start
button (13,
Figure 4
):
Correct
NOT Correct
Figure 5
NOTE:
If the machine is used for long periods of time, it is advisable to leave it switched on for a
few minutes before switching it off, so that the liquid in the tank can cool down more quickly.
The machine has been designed to minimize the risks due to electromagnetic
fields. Additional risks exist and it is recommended to keep a minimum safety
distance of 30 cm between the inductor and the operator's head or bust.
