5
Subject to change without notice | 83030000bUK | ait-deutschland GmbH
6
Contact
Addresses for purchasing accessories, for servicing
or for answers to questions about the unit and this
operating manual can be found on the internet and are
kept up-to-date.
www.ait-deutschland.eu
7
Warranty / Guarantee
For warranty and guarantee conditions, please refer to
the purchase documents.
NOTE
Please contact your dealer about all matters
concerning warranties and guarantees.
8 Disposal
When decommissioning the unit, always comply with
applicable laws, directives and standards concerning
recovery, recycling and disposal.
9
Scope of delivery
● Storage tank
● WPSK 40Split:
1 sensor for heating and heat pump regulator.
● WTPSK 101Split:
2 sensors for heating and heat pump regulator.
1. Inspect the delivery for outwardly visible signs of
damage.
2. Check to make sure that the delivery is complete.
Any defects or incorrect deliveries must be
claimed immediately.
9.1 Accessories
IMPORTANT
Use only original accessories from the manu-
facturer of the unit.
10
Transport, Installation,
Assembly
Observe the following when performing all work:
IMPORTANT
The tank must be installed in a frostproof
room, to prevent frost damage to the storage
tank, pipe system and connections.
NOTE
Install the storage tank as close as possible
to the heat generator, to keep the heat losses
as low as possible. Ensure the shortest pos-
sible pipe lengths to the load.
IMPORTANT
The floor or ground at the place of installation
must be dry, firm and able to safely support
the weight of the tank.
In the case of wall-mounted storage tanks,
the wall must have sufficient load-bearing ca-
pacity to safely carry the weight of the stor-
age tank when full.
“Technical Data", page 7, for the respective
model
10.1 Transport to installation location
To avoid damage during transport, transport the
storage tank (secured on the wooden pallet) to its final
installation location using a lifting truck.
CAUTION
Make sure to secure tank against slipping
during transport.
CAUTION
The tank can tip over when being removed
from the wooden pallet and during
transport with a hand truck or lifting
truck. This can result in personal injuries
and damage.
► Take suitable precautions, which prevent
the tipping hazard.
► Dispose of the transport and packaging materials
properly and under ecological aspects.
