background image

4

Subject to change without notice  |  83030000bUK |  ait-deutschland GmbH

3  Intended use

The storage tank may be used only for the intended 

purpose.

This  means  as  a  buffer  storage  tank  in  conjunction 

with:

 

● Air/water Split heat pumps

 

► If  local  regulations  apply,  observe:  laws,  stand-

ards and directives.

Disclaimer

The manufacturer is not liable for losses resulting from 

any use of the unit which is not its intended use.
The manufacturer's liability also expires:

 

● if work is carried out on the unit and its compo-

nents contrary to the instructions in this operat-

ing manual.

 

● if work is improperly carried out on the unit and 

its components.

 

● if work is carried out on the unit which is not de-

scribed in this operating manual, and this work 

has not been explicitly approved by the manu-

facturer in writing.

 

● if the unit or components in the unit have been 

altered, modified or removed without the explicit 

written consent of the manufacturer.

Safety

The unit is safe to operate when used for its intended 

purpose.  The  construction  and  design  of  the  unit 

conform  to  current  state-of-the-art  standards,  all 

relevant  DIN/VDE  regulations  and  all  relevant  safety 

regulations.
The operating manuals supplied with the product are 

intended for all users of the product.
The operation of the product via the heating and he-

at pump control and work on the product which is in-

tended for end customers / operators is suitable for all 

age groups of persons who are able to understand the 

activities and the resulting consequences and can car-

ry out the necessary activities.
Children and adults who are not experienced in hand-

ling the product and do not understand the necessa-

ry activities and the resulting consequences must be 

instructed  and,  if  necessary,  supervised  by  persons 

experienced in handling the product and who are re-

sponsible for safety.
Children must not play with the product.
The product may only be opened by qualified personnel.
All instructional information in this operating manual is 

solely directed at qualified, skilled personnel. 
Only  qualified,  skilled  personnel  is  able  to  carry  out 

the work on the unit safety and correctly. Interference 

by  unqualified  personnel  can  cause  life-threatening 

injuries and damage to property.

 

► Ensure that the personnel is familiar with the  local 

regulations, especially those on safe and hazard-

aware working.

 

► Only  allow  qualified  personnel  with  “electrical” 

training  to  carry  out  work  on  the  electrics  and 

electronics.

 

► Only  allow  qualified,  skilled  personnel  to  do  any 

other work on the system, e.g.

 

● Heating installer

 

● Plumbing installer

 

● Refrigeration  system  installer  (maintenance 

work)

Every person who carries out work on the unit must 

comply  with  the  applicable  accident  prevention  and 

safety  regulations.  This  applies  in  particular  to  the 

wearing of personal protective clothing.
During  the  warranty  and  guarantee  period,  servicing 

and repair work may only be carried out by personnel 

authorised by the manufacturer.

5.1  Personal protective equipment

There is a risk of cutting your hands on sharp edges 

of the unit.

 

► Wear cut-resistant protective gloves during trans-

port.

Summary of Contents for 813643













Reviews: