AIS DIUR series, User Manual

Page: 64 / 135

Manual_Version 2.00(20070416)
59
2. Motion Area Setup
Basic motion detection area for each camera is full video screen area. User can set specific area
as in the following picture. Also user can set motion detection sensitivity per camera.
(1)Motion Detection Are Setup
1) Select camera in the camera selection window.
2) Select sensitivity in the sensitivity control bar
3) Motion detection area is shown in the red checked color if mouse moves in the diagonal
direction by pressing the left button of the mouse. If the left button of the mouse clicks on the block,
one block is set for the motion detection area.
Select cell using the mouse or arrow button of the front panel and press Enter and select MENU
Motion detection is cancelled.
4)Record environment setup by selecting button
(2)Motion Detection Area Cancellation
1) Select camera in the camera selection window.
2) Motion detection area is cancelled and red checked color is disappeared if mouse moves in
the diagonal direction by pressing the right button of the mouse. When clicking one block in the red
checked screen by the right button of the mouse, this red checked block is cancelled for the motion
detection
Select cell using the mouse or arrow button of the front panel and press Enter and select MENU
Motion detection is cancelled.
3)Select environment setup by selecting button
1
2
3
1
3