AIS DIUR series User Manual Download Page 23

Page: 23 / 135

Manual_Version 2.00(20070416)

Precaution for Setup

1. The method of changing SETUP parameters.

Hot function key of the System in the front side, remote controller, mouse and virtual keyboard can be used to

change DVR system menu, setting etc. Most of items (items that user want to change) can be changed by mouse,

button. Regarding text input that needs to be added or changed in the setting, virtual keyboard is used for text

insertion. In case of keyboard, put the cursor to the item (the item that user wants to change) and press Enter /

Front Enter. Then virtual keyboard is appeared for the text insertion. Virtual keyboard is disappeared by pressing

Enter / Front ESC

button after input

The recording of newly changed setup is completed automatically when main menu is closed.

Summary of Contents for DIUR series








































































































































Search results

Summary of Contents for DIUR series

Reviews:

Brands by name

Popular brands

AIS DIUR series, User Manual

Search results

Summary of Contents for DIUR series

Reviews:

Brands by name

Popular brands