AIS DIUR series User Manual Download Page 110

Page: 110 / 135

Manual_Version 2.00(20070416)

105

Channel Button: It moves channel to the next channel when this button is pressed in the single

channel mode. When current mode is division mode, it moves in division mode status.

Screen Movement

It is possible to move the location of image in division screen by pressing the left button of mouse and

drag/drop to the other location.

3. Alarm / Event Window

When remote alarm is set in the connected site, camera loss, sensor, motion detection status is appeared in

real time.

4. Emergency Recording

This function can record image that is monitored remotely in real time to client PC with file. The

directory of data recording is the directory which is set in SETUP

If pressing button, file recording starts and LIVE+REC is appeared in each channel of live image and LIVE is

appeared after recording finished.

Alarm Sound Deletion

This button is alarm sound off button.

Audio Off

This button is audio off button.

This button is search button.

Control Window

Pan/Tilt Control button

System Control button

Summary of Contents for DIUR series








































































































































Search results

Summary of Contents for DIUR series

Reviews:

Related manuals for DIUR series

Brands by name

Popular brands

AIS DIUR series, User Manual

Search results

Summary of Contents for DIUR series

Reviews:

Related manuals for DIUR series

Brands by name

Popular brands