7
7 TrANSfer AND fIXUp OUTDOOr UNIT
CAUTION
● Please carry the unit to installation place with its initial packaging as best as possible.
● Be careful when hang the unit with sling (for example), because the center of gravity is not the
epicenter of this unit, and some methods should be taken for its overturn.
● The gradient shouldn't exceed 45°when transit the unit. Don't store the unit in decumbent.
● Bring the unit slowly by grabbing the left and right grips.
● Place your hands on the corner instead of holding the suction inlet in the side of the case, otherwise
the case could be deformed.
● Take care not to let hands or other objects come in and contact with the rear fins. Or it will hurt your
hands and damage the unit.
7.2 how to prevent overturn
If it is necessary to prevent the unit from falling over, the following method can be for your information:
● Prepare all 4 wires as indicated in the drawing.
● Unscrew the top plate at the 4 locations indicated A and B.
● Put the screws through the nooses and screw them back tight.
7.3 Unit dimension
A Location of the 2 fixation holes on thefront side
B Location of the 2 fixation holes on the back side
C Wires: field supply
Chart 14
YAV 112/140
YAV 160
Chart 15
