6
6 SeLeCTION LOCATION
Place selection
MVi system is suitable for installation in a commercial and light industrial environment.
●Obtain permission from the customer to install the unit in a site that satisfies the following conditions:
1)A place that compliance with the requirement mentioned in the second page.
2)A place that permits level installation of the unit.
3)A place that provides enough space for servicing safely.
4)A place that the drainage from the unit will not pose a problem.
5)A place that the unit does not bother next door neighbors.
6)A place where the indoor unit and outdoor units’ piping and wiring lengths come with in the allowable ranges.
●Avoid installing in following places:
1)A place exposed to air with high salt content (ex. Seaside area)
2)A place exposed to large quantities of sulfide gas (ex. Hot spring).
3)A place where organic solvent is used nearby.
4)A place close to a machine generation high frequency.
5)A place with poor ventilation.
CAUTION
The installation of the air conditioning unit must be positioned in a location that can sufficiently support its
weight and give protection against adverse environmental conditions. Failure to do so may result in unit
damage and possible human injury.
WARNING
Ensure that the unit is placed where there is no risk of flammable gases.
Ensure the outdoor unit is fixed to the base, to prevent movement of the unit.
CAUTION
●When the outdoor unit is installed in a place where always exposed to strong wind like a coast or on the
roof of a high building, please apply the windproof measures referring to the following examples:
Install the unit so that its discharge port faces to the obstacle, keeps a distance as 500mm or more
between the unit and the obstacle. Ensure the air out-let direction is vertical to the wind direction of the
operation season of air conditioner.
●In regions with significant snowfall, the outdoor unit
should be provided with a platform and snow-proof
duct.
≥
500mm
Seaso
n w
ind
Chart
13
