5
5 INTrODUCTION
5.1 Combination
The Indoor units can be installed in the following range, To learn which models of indoor units are compatible
with MVi unit, refer to the product catalogs.
Total capacity/quantity of indoor units table:
Combination table:
5.2 Standard attached fittings
Please check whether the follow fittings are of full scope. If there are some attached fitting free for use
immediately, please restore them carefully.
5.3 Optional accessories
To install the above outdoor units, the following optional parts are also required.
1.Indoor unit
2.Remote controller
3.Distribution joint
Outdoor unit
Capacity match ratio
Total quantity of indoor
unis (max)
112
50%-130%
6
140
8
160
9
No.
Accessories part
Qty.
No.
Accessories part
Qty.
1
Drain connector
1
4
Connector tube
2
2
Drainage plug
2
5
Installation
manual
1
3
Mounting pads
4
Table
2
Table
3
Capacity match ratio=Total nominal capacity of indoor unit/nominal capacity of outdoor unit
