9
INSTALLATION
LOCATION OF THE INDOOR UNIT
Select a location taking into account the following points:
The indoor units (ST) can be installed in 2 different rooms. The INDOOR UNIT should not be installed
in a bathroom or a laundry.
The location should be well aired without any object or piece of furniture standing in the way; the
air should circulate freely.
Do not place the appliance close to a heatsource, do not expose it directly to sunrays.
The location should allow easy connection of the power supply, of the cooling pipes and condensate
drain.
The unit should be mounted on a wall sturdy enough to withstand the weight of the appliance.
The panel of assembly should be installed as shown in the diagram below.
INSTALLATION OF THE ASSEMBLY PANEL
Place the assembly panel horizontally on the wall, as shown, by means of a bubble level .
Mark the position of the four holes of the panel on the wall and drill these holes to be filled with pegs.
Assemble the panel on the wall with the four screws. Tighten the screws.
CLEARANCE
50 mm mini.
80 mm mini.
50 mm mini.
1500 mm mini.
A
B
C
A
B
C
D
Summary of Contents for XLM OG 18
