Airwell AIRFLOW2020, Installation & Operation Manual

Page: 85 / 140

15
3 - POSITIONING
The installation has been implemented by qualified
technical personnel only and that the instructions con-
tained in the present manual and the local regulations
in force have been adhered to.
Intended use
Use the unit for the air treatment.
Follow the limits defined in the technical bulletin and
on this manual.
Do not treat air with :
high concentrations of dust
aggressive substances
residues from industrial processing.
The unit has been designed to be installed :
•
indoor
• in fixed position
The unit can not be installed outdoor or in a room /
compartment where the temperature can drop
below 10°C.
Choose the installation place according to the follo-
wing criteria:
•
customer approval
• safe accessible position
•
the operation noise and air flow expelled shall not
affect neighbors
•
spaces for conduits
• avoid flood-prone places;
•
verify the unit weight and bearing point capacity;
• verify that all bearing points are aligned and lev-
elled
• unit
in
bubble level
•
plan in the false ceiling the openings indicated in
the functional clearances to allow the access to the
unit for the maintenance operations
• Ceiling positioning : let free the projection to the
ground of the unit and of the functional clearances
to allow the access with ladders or other means
•
Floor positioning : install the unit raised from the
ground, on a frame to permit the maintenance of
the filter (bottom extraction).
Ceiling positioning and Floor, the unit for these two
type of installation is selled with the protection fairing
in sheet metal
Limit vibration transmission:
•
use antivibration devices on unit bearing/
supporting points
•
install flexible joints on the hydraulic/aeraulic con-
nections.
Neglecting these aspects may decrease the unit per-
formances and life.
CLEARANCE ACCESS RECOMMENDED
UNIT IN BUBBLE LEVEL
UNIT FIXING POINTS
Consider sound emissions
Avoid installations next to bedrooms
If the unit is installed near bedrooms, it is recommended
that
The functional clearances have to :
• guarantee the unit good operating
•
allow the maintenance operations
• safeguard the authorized operators and the ex-
posed person.
• position the unit taking into consideration the clear-
ances indicated in the dimensional
• consider the space necessary for filter extraction .