Page 46
aERO MODEL TyPE
21.DELTa (DELTa MiXing EnD POinT aDjUSTMEnT)
Changing V-Tail Mixing End Point Adjustment Percentage Values - Rudder Right and Left
1) Press the Navigation Pad
6
to scroll down to display V-TAIL RU (L)
and RU (R).
2) Press the Navigation Pad
5634
to highlight the desired servo (EL or
RU) and direction of travel (L or R) you would like to change the V-Tail
Mixing End Point Adjustment percentage value for. For example, if the
Elevator servo moves Right more than the Rudder servo moves Right
when you move the rudder control stick, you would decrease the RU
(R) EL>80% percentage value.
3) Press the INC+/M1 or DEC-/M2 keys to set the desired V-Tail Mixing
End Point Adjustment percentage value.
V-TAIL RU (L) and RU (R) setting range is 100% to 0%. The default setting is 80%. Decreasing the V-Tail Mixing End Point
Adjustment percentage value will decrease the movement for that specific servo and direction of travel. Increasing the V-Tail
Mixing End Point Adjustment percentage value will increase the movement for that specific servo and direction of travel.
20.v-TaiL (v-TaiL MiXing EnD POinT aDjUSTMEnT), cOnTinUED....
The Delta Mixing End Point Adjustment function allows you to adjust the servo travel of the elevator and aileron servos
independently while the Delta Mixing option is Active. In some cases, minor differences in the control linkage geometry can result
in unequal control deflection. The Delta Mixing End Point Adjustment function allows you to equalize control deflection, and
in addition, allows you the ability to change the control deflection amount of each servo in both directions. This allows greater
flexibility in making control surface adjustments versus using the elevator and aileron channel End Point Adjustments in the EPA menu.
IMPORTANT
To be able to access the DELTA menu and program the Delta Mixing End Point Adjustment function, you must
choose the WING>DELTA Model Type selection option in the TYPE menu. In addition, depending on the specific orientation
of your control linkages, in order for the Delta Mixing function to work as intended, one of the servos may need to be reversed
(using the NOR/REV setting in the REVERSE menu) so that both control surfaces move Up and Down together using the
elevator control stick.
Changing Delta Mixing End Point Adjustment Percentage Values - Elevator Up and Down
Prior to changing the Delta Mixing End Point Adjustment percentage values, you should first adjust the elevator and aileron
channel End Point Adjustment percentage values in the EPA menu to achieve the desired maximum amount of control
deflection in all four directions (elevator Up and Down, and Aileron Right and Left), then use the Delta Mixing End Point Adjustment
function to fine-tune the servo travel of each servo independently.
1) From the Display screen, press the ENTER key to display the Programming
Menus.
2) Press the Navigation Pad
56
to highlight DELTA, then press the
ENTER key to display the DELTA menu. The cursor will default to EL
(DOWN) EL>80%.
4) Repeat the previous procedures to set the desired remaining V-Tail Rudder Mixing End Point Adjustment percentage values.
Summary of Contents for SD-6G
Page 1: ...Page 1...
