Page 25
aERO MODEL TyPE
Deleting a Character
1) Press the INC+/M1 or DEC-/M2 keys to move the underscore under the character you want to erase.
2) Press the Navigation Pad
5634
to highlight the Erase Bracket , then press the ENTER key to erase the underscored character.
Deleting a Model Name
1) Press the INC+/M1 and DEC-/M2 keys at the same time to move the underscore under the first character.
2) Press the Navigation Pad
5634
to highlight the Erase Bracket , then press the ENTER key repeatedly to erase the entire
Model Name.
03.TyPE (MODEL TyPE)
The Model Type function allows you to quickly set up the transmitter's low-level mixing based on the type of model you're
flying. Common templates for AERO and HELI Model Types are provided. For example, if your aircraft features two aileron servos
and dual elevator servos, choosing these options will automatically change the transmitter's programming to accommodate this
setup. This takes the guess-work out of setting up more complex models.
WARNING
The Model Type function is used when setting up a new model and should be done prior to making any
programming changes to your model. When Model Type selection options are changed for the currently selected model,
all Programming Data for that model will be reset.
Individual Model Type selection options can be reset to the default setting by pressing the INC+/M1 and DEC-/M2 keys at
the same time.
2) Press the Navigation Pad
56
to highlight TYPE, then press the ENTER
key to display the TYPE menu. The cursor will default to >AERO or
>HELI depending on the particular model you've selected.
3) If the current Model Type is >HELI, press the INC+/M1 or DEC-/M2
keys to change the selection option to >AERO.
Changing the Model Type
1) From the Display screen, press the ENTER key to display the Programming Menus.
02.MODEL naME (MODEL naMing), cOnTinUED....
Making AERO Model Type Selection Options
Choose AERO Model Type selection options that suit the aircraft that you're setting up. For example, if your aircraft is a flying
wing and is controlled by elevons, choose WING>DELTA. If your aircraft features separate aileron servos and split elevator
halves that use one elevator servo on each elevator half, choose AILERON>2 and TAIL>2xEL, and so on.
Receiver channel slot assignments will change based on the selection options chosen. To verify which receiver channel
slots to plug your servos into, navigate to the SX MONITOR menu after saving your Model Type selection options. For more
information, see page 50. Depending on the Model Type selection options chosen, not all channel functions will be available for use.
1) From within the TYPE menu, verify that >AERO is displayed. If >HELI is displayed, change the Model Type to AERO by
following the steps in the Changing the Model Type section above.
SELECTION
DEFAULT
OPTION
WING (Type)
TAIL (Type)
AILERON (Servos)
NORMAL
NORMAL
1
DELTA* (Elevons)
V-TAIL or 2xEL**
2
AERO
*Delta mixing is sometimes referred to as Elevon mixing.
**If you require both servos to move the same direction, you will need to Reverse one of the channels.
AERO
MODEL
TYPE
Summary of Contents for SD-6G
Page 1: ...Page 1...
