Airtec Expert CYPRES 2, User Manual

Page: 21 / 74

page 20 - CYPRES 2 User’s Guide -
2.6.3.1 WSC Audio functionality check
When performing a gear check, also check your
audio. There are materials which possibly may
impede or prevent radio waves. Please ensure that
your helmet is not made out of those. Feel free to
contact us.
1. Have the Audio within a 3 foot range to your
WSC unit.
2. Switch on your WSC.
3. Observe the self-test.
4. When the display shows
, gently
insert a straightened paper clip* into the hole
BAT Test of the Audio and keep it there.
5. When the display shows you should
hear the melodic sound. If that happens, then
the functionality is given. When removing the
paper clip, the sound is played again.
2.6.3.2 WSC Audio error code:
If the Audio’s voltage decreases below a defined
value, then the melodic sound that you hear will
be played for approx. 1 minute instead of being
played for the typical 10 seconds. Please change
the battery.
2.6.3 The WSC Audio
WSC Audio
The Audio should notify you with a melodic sound
about the WSC change from
Wing Suit Status to Canopy
Status. (see 2.6.2) Being
aware of the Status is vital
for performing a safe flight
scenario.
Without the audible infor-
mation you have no confir -
mation that your WSC has changed status.
Place the Audio into your helmet like an acoustic
altimeter. It does not need handling, the function
is fully automatic.
The WSC Audio is not waterproof. Do
not submerge it in water or similar.