Airtec Expert CYPRES 2, User Manual

Page: 29 / 74

page 28 - CYPRES 2 User’s Guide -
If you keep pressed, then CYPRES displays 60
feet (20 meters) with an arrow pointing up
(

). If you are going to jump to a 60 feet higher
elevation, then release the button.
If you keep pressed, then CYPRES displays...
This carries on until 3000 feet (1000 meters). So
you have the possibility to adjust to a higher or
lower landing elevation of up to 3000 feet (1000
meters) in a real simple way. At the WSC the drop-
zone offset is limited to ± 1050 feet (± 350 meters).
The dropzone offset that you select will remain
indicated on the display, and CYPRES will adjust
automatically for this change during the next
jump (only).
Even the shortest release of the button during the
self-test cycle causes an interruption in the pro-
cess and CYPRES will ignore further attempts to
change the dropzone offset. In such cases the unit
will run through its self-test and end with
on the display, ready for operation (without adjust-
ment). Simply repeat the procedure as necessary.
If you need to make changes, you have to start