AirSpeed 1200 eNB Installation Guide
DUG01285
Airspan Commercial and Internal Use
29
o
Main AirSpeed 1200 unit
o
AC Connector Clamp
Tool Requirements
(For further information, see
Verify the Tools
.)
o
Large flat screw driver for pole clamps
o
Small flat blade screw driver (insulated shaft recommended)
o
Medium Philips head screw driver
o
8mm wrench for unit nuts
o
Knife
o
pliers
o
Small side cutters
o
Tweezers (or fine blade long nose pliers)
o
Wire strippers
Required Ancillary Equipment
o
Laptop PC for initial configuration
o
cable for temporary connection of the lap top
