AirSpeed 1200 eNB Installation Guide
DUG01285
Airspan Commercial and Internal Use
23
6.
Loosen the screws and open the AC connector clamps in preparation for later insertion of
the AC connector.
7.
The mounting bracket is installed and ready for AirSpeed 1200 installation.
4.1.3 Mounting Bracket on a Wall
The following images show the bracket wall mount assembly.
1.
Select the location on the wall to mount the AirSpeed 1200 mounting bracket.
2.
Position the mounting bracket against the wall with the engagement holes facing up. Be sure
to position the mounting bracket
straight with
level mounting
to ensure the unit sits
uniformly.
3.
Mark the wall through the holes on the mounting bracket at the required height.
4.
Attach the mounting bracket to the wall using wall plugs (x4) and appropriate screws rated
for at least 8-10 Kg per fastener.
Note:
Wall plugs (x4) and necessary hardware are
not
supplied by Airspan and are the
responsibility of the installer. Recommended 3/8” dia. with appropriate wall plugs according to field
conditions.
Figure 9: Mounting Bracket on Wall
5.
Loosen the screws and open the AC connector clamps in preparation for later insertion of
the AC connector.
6.
The mounting bracket is installed and ready for AirSpeed 1200 installation.
