manualshive.com logo in svg

Airspan 605-0000-742, Hardware Installation

Share
Download
Airspan 605-0000-742 Hardware Installation Download Page 41

Mounting the Base Station Radio (BSR) 

37 

 

To wall mount the SDA-4S: 

1.

 

On the wall, mark the position of the two mounting hooks. The dimensions of the wall-
mounting hooks are displayed in the template below. 

 

2.

 

Drill holes for each hole that you marked in the step above. 

3.

 

Insert wall anchors (supplied) into each of the drilled holes. 

4.

 

Insert the 9-inch screws (supplied) into the wall anchors. Ensure at least 2 mm of the screw 

is exposed to allow insertion into the SDA-4S mounting holes. 

5.

 

Hold the SDA-4S with both hands, and align the entrance to the two mounting hooks with 

the screws. Slide the screws into the mounting hooks, by lowering the SDA-4S onto the 

screws. 

Note: 

 For safety, both mounting hooks must be utilized when mounting the unit. 

 

Note:

  The SDA-4S is supplied with a 1-metre AC power lead assembly. Therefore, ensure 

the unit is mounted within reachable distance to the customer's mains power outlet. 

 

Note: 

 The maximum cable run between SDA-4S and MicroMAX is 100 meters. Therefore, 

ensure the unit is mounted within reachable distance.  

Summary of Contents for 605-0000-742




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands