Airspan 605-0000-742, Hardware Installation

Page: 31 / 83

Physical Description
27
AC/DC POWER CONVERTER
This section provides a description of the external AC/DC Power converter - Optional.
The third-party external AC/DC Power Converter is an optional unit that connects to the BSDU in the
event there is no -48VDC availability at the Base Station site. The AC/DC Power Converter chassis
fitted with one PS Unit for BSDU (PC-BSDU-1) supports up to 8 BSRs. An additional PS unit is
available (optional) for redundancy.
The figure below illustrates the AC/DC Power Converter's physical dimensions.
AC/DC Power Converter
Physical Dimensions
The AC/DC power converter physical dimensions are described in the following table.
Parameter Value Comment
Height 43.2 mm (1.7 inches)
Width 482.6 mm (19
inches)
Depth 228.6 mm (9 inches)
The physical dimensions exclude the bracket flanges for
mounting.
Redundant PS Unit
The RPSU-BSDU-1 is a redundant PS Unit for the BSDU AC/DC power converter. The power factor
corrected (PFC) front ends provide a 48 VDC output for distributed power applications. The small 1U
by 2U size allows for configurations of either height in hot-swap redundant systems while its
internal fan and cooling design permits wide use with reliable operation.
The figure below illustrates the redundant PS Unit.