Page
8
of
14
DO NOT INFLATE THE SEALED ARMS
BEFORE YOU SLIP IT ON THE ARMBAR!
7.2 Assembly of the sealed arms:
- Slip the Sealed Arm on the Arm Bar, using the
highlighted hole.
- Inflate the Sealed Arm through the valve with
the help of the supplied handpump. When
deflating the Sealed Arm, you must
PUSH
THE MIDDLE OF THE VALVE
, this way
opening it. You can close the valve by
pressing its middle again. D
on’t forget to fit the
cap on the valve after inflating.
- Bind the webbing around the middle bar and
tie the eyelets with the supplied rope.
- Add the webbing cam buckle
bungee cord:
a) The cord goes through the
webbing anchor point on the
sealed arm cover, connects
to the cam buckle with both
ends,
b) The webbing is inserted
through the hole on the top
of the middle bar.
- The highlighted PVC loop is for pulling the
uninflated sealed arm in its cover. Make
sure it is hidden when using the LOS. It
may harm users when rotating.
