Page
5
of
14
If you still have issues with the mechanism, please contact Airquee
customer support on the following 44 (0)1179 414 918.
To avoid getting an error code:
- Make sure the electric power supply is stable and not fluctuating in any way.
- Make sure all the cables are connected properly: the motor with the control box, and the
control box to the main electric supply.
6. Hazards relating to electrical equipment:
The use of portable electrical equipment involves the potential risk of electric shock, burns or
fire. A major cause of accidents is failure to maintain equipment. The risk can be managed effectively
if sensible and appropriate rules for use and maintenance are applied!
1.
The most important rule when handling the mechanism is to
ALWAYS DISCONNECT IT
from its power source when
ASSEMBLING THE UNIT
, opening the Control Box or the
Drive Motor.
(the only case when this doesn’t apply is when you manually reset the
Yaskawa).
2.
The control box and the wiring used within the game are
NOT WATER PROOF OR
WATER RESISTANT
, therefore we do not recommend operating the unit in the rain.
Using electrical equipment in wet or damp conditions can be dangerous. If you suspect
water has entered any of the electrical components they should not be used until
completely dry and tested. We recommend taking professional advice where necessary.
3.
All cables and electrical equipment must be tested in accordance with the regulations of
your country.
4.
In accordance with HSE guidelines, all 240v equipment should be protected with an RCD
(Residual Current Device) having a maximum trip current of 30 mA.
RCD’s are available
from Airquee or your electrical store.
When using it with a generator, make sure it has an output of more than 4 kVA (kilo-volt-ampere),
and a stable 230 Volts on 50Hz.
7. Setup:
7.1 Assembly of the mechanism (AQ4816SP2):
CAUTION!
MAKE SURE THE MECHANISM IS NOT
CONNECTED TO A POWER SOURCE WHEN ASSEMBLING IT!
