Page
10
of
14
7.4 Assembly of the Control Panel:
The Control Panel consists of:
Control Box
Support Bar
Legs
ON/OFF
Key
Triangle
Key
12M Cable 3M Cable
AP2785
MP0013
MP0012
MP0056 MP0015
MP0008
MP0009
- You must bolt these 3 parts together.
7.4.1 The Control Box:
1. 12M Cable electrical output socket.
2. Main On/Off switch. It works only with the supplied keys.
3. Emergency Stop: In case you must stop the mechanism
suddenly.
4. This will light up when the Control Panel is under power,
and the key is turned to ON.
5. You can change the movement direction of the arms.
6. Adjusting the speed of the arms.
7. Key hole to open the Control Box.
8. Main power cable.
7.4.2 Transporting and storing
When packing away the mechanism for transporting/storing, we advise to:
- remove the keys of the control box.
- do not place anything heavy on the control box or on any part of the mechanism.
- make sure the mechanical parts are packed and protected correctly.
- store the mechanism in dry conditions/in a dry place.
- not to remove the sealed arms from its covers.
- leave the bolts and nuts on the mechanism in their corresponding holes.
- dry every part (if for any reason it becomes wet).
1
2
4
5
6
7
3
8
