Page
12
of
14
The mechanism has only 1 lubrication point.
This bearing has already a sufficient inner
lubrication, but if lubrication is deemed necessary,
manual lubrication can be applied through the hole
highlighted on the picture.
The device shall not be made available to the public until any adjustments or repairs judged to
be necessary as a result of this inspection have been completed.
8.2 Trial runs
Following the check, the controller shall run one or more trial runs without any members of the
public on it, simulating where possible emergency situations to verify particularly that the control
system and the emergency stop works properly. Only
NOW ARE THE PLAYERS ALLOWED TO
ENTER THE UNIT.
8.3 Thorough examination
Besides the regular checks, the Last One Standing should be thoroughly examined at
appropriate intervals by a competent person/institute/organization/company.
The intervals between two successive thorough examinations may be governed by existing
national regulations:
9. Spare Part Codes:
See the location of every spare part on the pictures below:
Code and Name
Description
MP0002 - Shock Absorber Spring
Holds and adjusts the height of the inflatable arm.
MP0003 - Drive Motor Leg
Stabilizes the Drive Motor.
MP0004 - Drive Motor Wheel
For moving the mechanism.
MP0005 - 10 x 30 mm bolt
To fix the Legs to the base of the Drive Motor and to adjust the
height of the Arm Bars.
MP0006 - 12 x 60 mm bolt
To fix the Metal Arms to the Middle Bar.
MP0007 - 8 x 50 mm bolt
Used to fix the Shock Absorber Spring to the 1m Metal Arm
and the Middle Bar and to fix the Control Box to its supporting legs.
MP0008 - 12m Cable
To connect the Control Panel to the Drive Motor.
MP0009 - 3m Cable
To connect the Control Panel to the main electric socket.
MP0010 - Set of Inner Hexagonal Bolts
To fix the Middle Bar to the Drive Motors Shaft.
MP0012 - the Legs of the Control Panel
To stabilize the Control Panel.
MP0013 - the Support Bar of the Control Box
The middle part of the Control Panel.
MP0015 - Triangle Key of the Control Box
To lock the Control Box.
MP0016 - Emergency Button
To stop the movement of the arms in case of an emergency.
MP0017 - Green Button
MP0018 - Red Light
BEARING
LUBRICATION HOLE
