-15-
TIGHTENING TORQUE FOR END CAPS.
(Inches/lbs.) Newton-meter
K8 = 130 14.69
K11=130 14.69
K12=130 14.69
K17=130 14.69
K18=130 14.69
K24=130 14.69
K28=130 14.69
K30=130 14.69
K35=130 14.69
K50=165 18.64
K60=165 18.64
K70=165 18.64
K100=165 18.64
Fit pistons:
Remove circlips on gudgeon pin ends. Slide the gudgeon pins out. Fit new
pistons, but first check gudgeon pin and small end bush fit. It must be a slide
fit. Replace or ream small end bush, to fit gudgeon pin. See small end bearings
and gudgeon pins on page 4.
