Page 13 of 23
USER MANUAL
ADS intelligent
Softwareversion:
0.95
9.3
System-Settings
Inside this submenu the operator can set up the display brightness, to nurse call logic and the
key-sound in case of pressing a key.
By leaving the submenu by pressing the "√" button in the lower right corner all changes will
be saved.
9.3.1
Brightness
by pressing the key (+) or (-) brightness of the display can be adjusted.
9.3.2
Logic nurse call
by this button, the nurse call logic (hardware relais) can be permanently turned one or off. If
the nurse call logic is deactivated, the relais will be activated in the case of an alarm or
warning.
If the nurse call logic is activated, the relais will be activated permanently and deactivated in
the case of alarm or warning, as well as in the case of power failure.
9.3.3
key tone
if this function is enabled, you will hear a beep sound when pressing a button as a
confirmation.
9.3.4
hour of use
the hours of use are shown the display since the last maintenance.
