Page 3 of 23
USER MANUAL
ADS intelligent
Softwareversion:
0.95
The pneumatic plug of the mattress into the pneumatic plug of the AD intelligent and lock it
with the red sliding knob.
Please note:
One of both damaged fasteners or one or more missing or damaged parts or one
or more pneumatic hose couplings not stuck on the plug of the mattress can lead
to leakages and thus lead to a not intended use of the system.
The mattress is placed on a suitable bed, the connection of the hose must always at the
foot end of the bed are. All surfaces in beds with adjustable mattresses can be used.
Please make sure, that hoses or cells aren’t snapped, dense or damaged, by the bed
or
parts of the bed, or adjustable surfaces.
Please note:
The top straps should not be attached to the bed, if mobility of the bed in any
circumstance is limited. The top straps may only the be connected at the
placeable part of the mattress. It’s not allowed to connect the mattress and the
bed using the top straps. Otherwise, there is danger that the maneuvarability
of the bed and even the functionality of bed will be limited. In addition there is
a danger of damage to the bed and/or the ADS
intelligent
system.
Please note:
You have to depend on the bed and
mattress, the content of the so called “Bed
bars standard / Side wings standard”, DIN EN 606601
-2-52 (previous DIN EN IO
1970) and compliance of the minimum distance between the upper side of the bed
bars and/or side wings of the bed and upper side of the mattress
.
Please note:
Be alert on correct working snap-locking. If you discover defect snap-
locking’s,
please exchange these a.s.a.p. For security reasons three top straps are located on
both sides of the mattress. These guarantee the handhold of the mattress on the
bed.
Please note:
There should always be a sheet between the mattress and the patient present. The
mattress should not contact the skin of the patient or the patient wounds directly.
Please note:
There should be no moisture in the device. You will use the device only, where it is
safe, that no moisture can get inside the device.
