airmaxeco.com | 866-424-7629
4
4
Separate Diaphragms
Use a small pick tool to separate the outer diaphragm
from the inner diaphragm.
5
Remove Center Ring
REMOVE and save the center retaining nut and two
washers using your 7mm nut driver.
6
Remove Inner Diaphragm
REMOVE the inner diaphragm including the diaphragm
front boards and back boards.
Take note of the two metal rings
7
Install Protective Washer
INSTALL a new diaphragm front board. The diaphragm
front board is the one with 4 pegs. Apply the protective
washer on top of the diaphragm front board.
8
Install Inner Diaphragm
INSTALL a new inner diaphragm and align the 4 pegs with
the 4 holes inside the inner diaphragm.
INSTALLATION INSTRUCTIONS:
Continued...