P.O. Box 38 | Romeo, MI 48065
5
9
Push Front Board into Place
A Push the front board firmly into place and make sure the
pegs come through evenly on the reverse side of the inner
diaphragm.
10
Place Metal Rings
PLACE the two metal rings onto the inner diaphragm
assembly. Align the 2 lines on the front board to be
pointing to the notches on the inner diaphragm.
11
Place Diaphragm on Armature
INSTALL the inner diaphragm into the armature with
the two lines being vertical and the metal rings in
between the inner diaphragm and the armature.
12
Install 2
nd
Protective Washer
INSTALL the 2
nd
protective washer onto the diaphragm
followed by the diaphragm back board with the flat
side facing outwards. It can be helpful to tilt the
compressor to keep the washer and diaphragm back
board in place.
13
Install Flat Washer, Lock Washer, Nut
INSTALL the flat washer, lock washer and nut. Use the
7mm nut driver to securely tighten the nut.
