AirLive WIAS-1200G User Manual Download Page 96

Page: 96 / 180

AirLive WIAS-1200G

User’s Guide

4.3.5 Proxy Server Properties

AirLive WIAS-1200G supports Internal Proxy Server and External Proxy Server functions. Please select an

Access

Gateway

and then perform the necessary configurations.

External Proxy Server:

Under the AirLive WIAS-1200G security management, the system will match the

External Proxy Server list to the end-users’ proxy setting. If there isn’t a match, then the end-users will no be

able to reach the login page and thus unable to access the network. If there is a match, the end-users will be

directed to the system first for authentication. After a successful authentication, the end-users will be redirected

back to the desired proxy servers depending on various situations.

Internal Proxy Server:

AirLive WIAS-1200G has a built-in proxy server. If this function is enabled, the end users

will be forced to treat AirLive WIAS-1200G as the proxy server regardless of the end-users’ original proxy

settings.

Note: For more details about how to set up the proxy servers, please refer to Appendix E and Appendix F.

Summary of Contents for WIAS-1200G





















































































































































































Search results

Summary of Contents for WIAS-1200G

Reviews:

Related manuals for WIAS-1200G

Brands by name

Popular brands

AirLive WIAS-1200G, User Manual

Search results

Summary of Contents for WIAS-1200G

Reviews:

Related manuals for WIAS-1200G

Brands by name

Popular brands