AirLive WIAS-1200G User Manual Download Page 116

Page: 116 / 180

AirLive WIAS-1200G

User’s Guide

108

Change admin password

Besides supporting the use of console management interface through the connection of null modem, the

system also supports the SSH online connection for the setup. When using a null modem to connect to

the system console, we do not need to enter administrator’s password to enter the console management

interface. But connecting the system by SSH, we have to enter the username and password.

The username is “admin” and the default password is also “admin”, which is the same as for the web

management interface. You can use this option to change the administrator’s password. Even if you

forgot the password and are unable to log in the management interface from the web or the remote end of

the SSH, you can still use the null modem to connect the console management interface and set the

administrator’s password again.

Note:

Although it does not require a username and password for the connection via the serial port, the same management

interface can be accessed via SSH. Therefore, we recommend you to immediately change the AirLive WIAS-1200G

Admin username and password after logging in the system for the first time.

Reload factory default

Choosing this option will reset the system configuration to the factory defaults.

Restart AirLive WIAS-1200G

Choosing this option will restart AirLive WIAS-1200G.

Summary of Contents for WIAS-1200G





















































































































































































Search results

Summary of Contents for WIAS-1200G

Reviews:

Related manuals for WIAS-1200G

Brands by name

Popular brands

AirLive WIAS-1200G, User Manual

Search results

Summary of Contents for WIAS-1200G

Reviews:

Related manuals for WIAS-1200G

Brands by name

Popular brands