AirLive WIAS-1200G User Manual Download Page 9

Page: 9 / 180

AirLive WIAS-1200G

User’s Guide

1. Before You Start

1.1 Audience

This manual is for Hotspot owners or administrators in enterprises to set up network environment using AirLive

WIAS-1200G. It contains step by step procedures and graphic examples to guide MIS staff or individuals with slight

network system knowledge to complete the installation.

1.2 Document Conventions

For any caution or warning that requires special attention of readers, a highlight box with the eye-catching italic

font is used as below:

Note: For security purposes, you should immediately change the Administrator’s password.

indicates that clicking this button will return to the homepage of this section.

indicates that clicking this button will return to the previous page.

indicates that clicking this button will apply all of your settings.

indicates that clicking this button will clear what you set before these settings are applied.

Summary of Contents for WIAS-1200G





















































































































































































Search results

Summary of Contents for WIAS-1200G

Reviews:

Related manuals for WIAS-1200G

Brands by name

Popular brands

AirLive WIAS-1200G, User Manual

Search results

Summary of Contents for WIAS-1200G

Reviews:

Related manuals for WIAS-1200G

Brands by name

Popular brands