AirLive PoE-FSH2442 User’s Manual
16
6.9 Configuration
Setting
Find that there are seven items, including
Port Setting, IEEE 802.1Q VLAN Settings, Trunk Setting, Mirror
Setting, IEEE 802.1p Default Priority, PoE Port Setting, PoE System Setting and Broadcast Strom Control
Setting
in Setup menu.
6.9.1 Port
Settings
In Port Settings menu (Figure 17), this page will show each port’s status, selected drop down menu to set
each port’s
Speed, and QoS priority
then press
“Apply”
button to activate changes
.
To refresh the information
table to view the latest port setting and Link Status, press the Refresh button.
The
Link Status
in the screen will show the connection speed and duplex mode; else this dialog box will
show
Down
when the port is disconnected.
Figure 17. Port Setting
Note: The priority of Gigabit Fiber port is higher than Copper.
Speed:
The 1~24 100BASE-TX port connections can operate in Forced Mode settings (100M Full, 100M Half, 10M
Full, 10M Half), Auto, or Disable. The default setting for all ports are Auto.
The 25~28 1000BASE-T port connections can operate in Forced Mode settings (1000M Full, 100M Full,
100M Half, 10M Full, 10M Half), Auto, or Disable. The default setting for all ports are Auto.
The 25~26 mini-GBIC (Gigabit Fiber) connections can operate in Forced Mode settings (1000M Full), Auto,
or Disable
QoS:
This column displays each port’s 802.1p QoS priority level for received data packet handling. Default setting
for all ports is Middle. You can change the priority settings in
802.1p Default Priority
.
6.9.2
IEEE 802.1Q VLAN
A VLAN is a group of ports that can be anywhere in the network, but communicate as though they were in
the same area.
VLANs can be easily organized to reflect department groups (such as R&D, Marketing), usage groups (such
as e-mail), or multicast groups (multimedia applications such as video conferencing), and therefore help to
simplify network management by allowing users to move devices to a new VLAN without having to change
any physical connections.
The IEEE 802.1Q VLAN Configuration page provides powerful VID management functions. The original
settings have the VID as 01, named “default”, and all 16 ports as “Untagged”.
