28
3.2.3 Create Virtual AP (VAP)
The APO1200/APO1215 support broadcasting multiple SSIDs, allowing the creation of Virtual Access Points, partitioning
a single physical access point into
7
logical access points, each of which can have a different set of security, VLAN
Tag(ID) and network settings.
Figure 3-2
shows multiple SSIDs with different security type and VLAN settings.
Figure 3-2
Multiple SSIDs with different Security Type and VLAN Tag
3.2.3.1 Virtual AP Overview
The administrator can view all of the Virtual AP's settings via this page.
Please click on
Wireless -> Virtual AP Setup
and the Virtual AP Overview Page appears.
VAP :
Indicate the system's Virtual AP.
ESSID :
Indicate the ESSID of the respective Virtual AP
MAC Address :
The MAC address of the VAP Interface is displayed here. When you enable AP and reboot system,
the MAC address will display here.
Status :
Indicate the Status of the respective Virtual AP.
The
Primary AP
always on
.
Security Type :
Indicate an used security type of the respective Virtual AP.
MAC Filter :
Indicate an used MAC filter of the respective Virtual AP.
Edit :
Click
Edit
button to configure Virtual AP's settings, including security type and MAC Filter.
APO1200
