8
1.5 Specification
Wireless Architecture Mode
Î
Router AP Mode
9
Wire connection as WAN , in this mode , the device run as DHCP server to assign IP address to wireless
clients out of a private IP address pool behind a NAT
9
This enables the wireless interconnection of Access Point in an IEEE802.11 network .and accept wireless
clients at the same time
Î
AP Mode
9
Pure AP Mode
•
It can be deployed as a tradition fixed wireless Access Point
•
It allow wireless clients or Stations(STA ) to access
9
AP/WDS Mode
•
This enables the wireless interconnection of Access Point in an IEEE802.11 network .and accept
wireless clients at the same time
Î
WDS Mode
9
This enables the wireless interconnection of Access Point in an IEEE802.11 network.
9
It allows a wireless network to be expanded using multiple access point without the need for a wired
backbone to link them.
9
This also be referred to as repeater mode.
9
It can’t allow wireless clients or Stations (STA) to associate.
Î
CPE Mode
9
WiFi connection as WAN , in CPE mode , the device run as DHCP server to assign IP address to wire clients
out of a private IP address pool behind a NAT
Î
Client Bridge(CB) + Universal Repeater(UR) Mode
9
A wireless repeater and bridge with DHCP server enabled, clients on the same subnet as host AP(Primary
Router).
Î
CPE + AP Mode
9
WiFi connection as WAN , in this mode , the device run as DHCP server to assign IP address to wire and
wireless clients out of a private IP address pool behind a NAT
Networking
Î
Support Static IP, Dynamic IP(DHCP Client), PPPoE and PPTP on WAN Connection
Î
Support MPPE-64 and MPPE-128 Encryption on PPTP Connection
Î
Support PPTP/L2TP/IP Sec Pass Through
Î
PPPoE and PPTP Reconnect – Always On , On demand, Manual
Î
MAC Cloning