217
8.1.4 Configure LAN Setup
Here are the instructions for how to setup the local IP Address and Netmask.
Please click on
System -> LAN
and follow the below setting.
LAN IP :
The administrator can manually setup the LAN IP address.
Î
IP Address :
The IP address of the LAN port; default IP address is 192.168.2.254
Î
IP Netmask :
The Subnet mask of the LAN port; default Netmask is 255.255.255.0
DHCP Setup :
Devices connected to the system can obtain an IP address automatically when this service is
enabled.
Î
DHCP :
Check
Enable
button to activate this function or
Disable
to deactivate this service.
Î
Start IP / End IP:
Specify the range of IP addresses to be used by the DHCP server when assigning IP address
to clients. The default range IP address is 192.168.2.10 to 192.168.2.70, the netmask is 255.255.255.0
Î
DNS1 IP :
Enter IP address of the first DNS server; this field is required.
Î
DNS2 IP :
Enter IP address of the second DNS server; this is optional.
Î
WINS IP :
Enter IP address of the Windows Internet Name Service (WINS) server; this is optional.
Î
Domain :
Enter the domain name for this network.
Î
Lease Time :
The IP addresses given out by the DHCP server will only be valid for the duration specified by the
lease time. Increasing the time ensure client operation without interruptions, but could introduce potential
conflicts. Lowering the lease time will avoid potential address conflicts, but might cause more interruptions to the
client while it will acquire new IP addresses from the DHCP server. Default is
86400
seconds
Click
Save
button to save your changes. Click
Reboot
button to activate your changes
