186
7.2.3 Site Survey
Use this tool to scan and locate WISP Access Points and select one to associate with.
Please click on
Wireless -> Site Survey
. Below depicts an example for site survey.
ESSID : Available
Extend Service Set ID of surrounding Access Points.
MAC Address :
MAC addresses of surrounding Access Points.
Signal :
Received signal strength of all found Access Points.
Channel :
Channel numbers used by all found Access Points.
Security :
Security type by all found Access Points.
Band :
Wireless band used by all found Access Points.
Network Type :
Network type used by all found Access Points.
Select :
Click “
Select
” to configure settings and associate with chosen AP.
While clicking “Select” button in the Site Survey Table, the “ESSID” and “Security Type” will apply in the
Wireless General Setup. However, more settings are needed including Security Key.
