STEP 4 - MOUNT LEFT HAND TRACK cont...
4-2: Level the track and mount to the door jamb at the midpoint of the track
using only 1 anchor at this time.
The remaining anchors will be used in a later step.
STEP 5 - MOUNT RIGHT HAND TRACK
5-1: Repeat step 4 for the right hand track assembly.
STEP 6 - MOUNT TOP COVER
6-1: Using two people, lift the aluminum top cover assembly onto the top of the bearing plates. Make sure
the square support bar is on the bottom of the cover and is towards the wall. (FIG. 6A)
6-2: Using two 5/16” x 1” bolts, attach the cover support bar to each bearing plate. Use the inner most
pre-drilled hole at the top of the bearing plates. (FIG. 6B)
FIG. 6A
FIG. 6B
STEP 7 - MOUNT VINYL COVER SUPPORT BAR
7-1: Unroll vinyl cover from aluminum support bar as shown in FIG. 7A below.
FIG. 7A
Summary of Contents for XRS Elite
Page 1: ......
