WWW.AIRLESSCO.COM TEL: 805-523-0211 FAX: 805-523-1063
Email: [email protected]
WWW.AIRLESSCO.COM TEL: 805-523-0211 FAX: 805-523-1063
Email: [email protected]
HIGH PRESSURE HOSE
•
The hose provided by AIRLESSCO is selected from the finest hoses available and is intended to be used on your
machine only.
•
DO NOT use pressure hose for any other purpose & do not substitute any other hoses for high pressure hose.
•
If the hose becomes frayed or has any cuts on it, the hose must be replaced.
•
Do not allow your pressure hoses to be run over by any type of vehicle.
SPRAY GUN- OR CONTROL HANDLE
•
The gun included with your machine should always be treated as a loaded firearm.
•
HIGH PRESSURE WATER IS DANGEROUS & should never be directed at any person or any body parts.
•
Your gun has safety features you should use. The Trigger Lock should be engaged any time gun is not in use.
•
DO NOT TAPE OR TIE, in any way render the spring device inoperative.
WAND
•
The wand supplied with your machine should be handled with care. If the wand is bent it should be replaced.
CHEMICAL INJECTOR
•
Your machine is equipped to use a CHEMICAL INJECTOR for those jobs that require more than water cleaning.
The AIRLESSCO CHEMICAL INJECTOR will allow you to soak the surface with a liquid chemical/detergent.
•
If you need to use surface conditioners such as soaps and degreasers, you must use a CHEMICAL INJECTOR.
•
DO NOT pump any surface conditions or any other medium other than water through the high pressure pump.
To do so could damage the pump and void your warranty.
SAND INJECTOR - OPTIONAL ITEM
•
AIRLESSCO units are equipped to use a SAND INJECTOR SYSTEM. Water Sandblasting is an extremely
effective way of cleaning. The AIRLESSCO SAND BLASTING INJECTOR allows sand to flow into the high
pressure water stream to create a powerful cleaning system. Dry sandblasting is being replaced by wet
sandblasting. SOME USES: Removing boat barnacles, rust, graffiti and blasting painted surfaces down to metal
for repainting.
PARTS
INLET WATER FILTER
•
The inlet water screen is intended to prevent debris from entering the pump and causing damage. DO NOT
OPERATE the machine without the Inlet Water Screen in place.
•
The Inlet Water Screen is stainless steel and should be removed and cleaned every 25 hours of operation. If
your water conditions are poorer than normal, it should be cleaned more often.
4
