WWW.AIRLESSCO.COM TEL: 805-523-0211 FAX: 805-523-1063
Email: [email protected]
PRESSURE WASHER ACCESSORIES
PRESSURE WASHER HOSE
PN 176-002
3/8" x 50' 3000 PSI hose
PN 176-022
3/8" x 50' 4500 PSI hose
PRESSURE WASHER TEST GAUGE
PN 100-039
Test gauge assembly for pressure washers complete with
quick disconnects.
HIGH PRESSURE QUICK DISCONNECT FITTINGS
PN 100-020
Thread 3/8" F with M nipple, use on the hose
and high pressure outlet.
PN 100-022
Thread 3/8" F with F coupler, use on the other
end of the hose.
PN 100-021
Thread 3/8" M with F coupler, for the gun handle.
PN 176-005
Thread 1/4" F with F coupler, for the wand.
PN 176-004
Thread 1/4" M with M nipple, for the tip.
37
Pressure washer hose comes with 3/8" male fi ttings, with one end having a swivel to
connect to the gun. The hose has a wire braid for strength and rubber outer cover to
resist abrasion. For convenience you can use quick disconnects at each end of the hose,
gun and pump.
Quick disconnects are used to make connecting and disconnecting hoses, guns and tips,
quick and easy. Quick disconnects are only for use with pressure washers and should
not be used on an airless spray hose.
High pressure liquid fi lled gauges are used to test the working pressure of a pressure
washer. They are designed to work to a maximum pressure of 4000 to 5000 psi.
