Troubleshooting
34
3A4147B
Sprayer does not run at all
Check the connections.
Control is not receiving a
motor position sensor signal
1.
Turn power OFF.
2.
Disconnect motor position sensor
and inspect for damage at
connectors.
3.
Reconnect sensor.
4.
Turn power ON. If code continues,
replace motor.
Digital display shows
CODE 16
Control board status light
blinks 16 times repeatedly
Sprayer does not run at all
Check voltage supply to the
sprayer (sprayer plugged into
wrong voltage)
1.
Set sprayer to OFF and disconnect
power to sprayer.
2.
Locate a good voltage supply to
avoid damage to electronics.
Display shows CODE 17
Control board status light
blinks 17 times repeatedly
PROBLEM
CAUSE
SOLUTION
ti18685a
