Setup
3A4147B
15
6.
Fill throat packing nut with Throat Seal
Oil to prevent premature packing wear.
Do this each time you spray.
7.
Turn power OFF.
8.
Plug power supply cord into a properly
grounded electrical outlet.
9.
Turn prime valve down to DRAIN
position.
10. Place pump in grounded metal pail
partially filled with flushing fluid. Attach
ground wire to pail and to true earth
ground. Perform steps 1 - 5 of
Startup
to
flush out storage oil shipped in sprayer.
Use water to flush water-base paint and
mineral spirits to flush oil-base paint and
storage oil.
ti29665a
ti22950a
ti14842a
ti29390a
