FAN ADJUSTMENTS
The fan is adjusted at the factory and is ready for operation. It is a fully operable product without extra adjustments.
However if you want to adjust the fan according to your needs, please follow the instruction below.
You can always reset to the factory settings.
Factory setting parameters (spigot 125/spigot 100):
3
- speed in standby mode - 0 m /h
3
- speed in 24 Hours mode - 40/33 m /h
3
- speed in Silent mode - 83/72 m /h
3
- speed in Max mode - 97/82 m /h
- humidity extraction Max mode
- turn-on delay time - 0 min
- off-delay time - 5 min
- humidity extraction time - 30 min
- motion sensor (for iFan Move) is included.
12
FAN OPERATION INDICATION
The fan is turned on by the motion sensor or external switch - the light indicator STATUS is green.
The fan is in standby mode - the light indicator STATUS blinks green once in 2 seconds.
Fan operation in 24 Hours mode - the light indicator is red.
Fan operation in humidity extraction mode - the light indicator STATUS blinks red once in 2 seconds.
Fan operation in interval ventilation mode - the light indicator STATUS blinks in turn red and green once in 2 second.
Fan operation in turn-on delay mode - the light indicator STATUS blinks red twice in 1 second.
Summary of Contents for Aura Smart
Page 23: ...23 ...
