12
1. Remove the dust protection caps on the required connectors.
Ensure that small parts do not fall into the MultiPlexBox, as this can result in faults or noise
generation during operation.
2. Then insert the right number of plastic fittings from the connection set and lock into the connectors.
3. Attach the narrow mounting bracket
A
from the connection set to the connection plate on the left and right.
The sealing strip on the edge of the connection plate can be removed.
4. Attach the wide mounting bracket
B
from the connection set to the MultiPlexBox. The casing screws are
used for attachment. loosen the four casing screws and reattach with the mounting bracket. The factory-
mounted mounting brackets can be removed in advance, if necessary!
5. Screw the connection screw from the connection set into one side of the connection plate and mount the
MultiPlexBox here using the slotted hole in the mounting bracket. Then bring the mounting brackets together
on the opposite side and attach with the second connection screw.
6. Now attach the MultiPlexBox using the two remaining attachment points (connection side ventilation unit /
electrical connection side). Then check the tightness of all attachment points.
