8
2.3 Mounting
The unit can be vertically or horizontally mounted to the wall, a sloping roof, or the ceiling using the drilling
attachment points indicated with arrows on figure 6. (see Fig. 6, 7,8, 9). The connection plate
– 90001252 Is
available for suspended and concrete installation.
2.4 Installation of Sensors
Please follow this guidance to install the VOC and Humidity sensors.
1. Open the unit cover.
2. Clip the four plastic sleeves into the provided holes on the extract air side, e.g with flat nose pliers.
3. Attach the sensor board.
4. Insert the cable through the corner opening in and connect the sensor to the control board.
5. Close the unit cover again, ensuring all screws are returned and tight.
