manualshive.com logo in svg

AIREDALE Barkell Therm X HR95, Technical Manual, Page: 47 / 59

Share
Download
AIREDALE Barkell Therm X HR95 Technical Manual Download Page 47

 

 

 

 

Therm-X MVHRU HR95 

Technical Manual 

Page 47 of 59 

Version 2.4, 25/09/2020 

 

14.9.

 

CONDENSATE TRAP 

Condensate trap with integral foul air infiltration prevention system. 

The trap cover is transparent for easy monitoring of the water level. 

Unit 

Type 

Trap 

Order Reference 

ALL 

ERI-BAL 

 

PLEASE NOTE: 
 

-

 

Use of a condensate trap is only recommended where gravity assisted condensate collection is achievable 

-

 

Accessory is supplied loose for fitting on site by others 

-

 

Pipework not included 

-

 

For additional information please consult the 

Therm-X MVHRU Accessories Technical Manual

 

 

14.10.

 

CONDENSATE PUMP 

Condensate pump kit for connection with the Therm-X units.  

Includes  pump  body,  reservoir  with  floating  sensor,  support  bracket  for 
installation on the unit and rubber bend for condensate outlet connection. 

Unit  

Type 

Pump Order  

Reference 

ALL 

CERP-MAXI-ORANGE 

 

 

PLEASE NOTE: 
 

-

 

Use of a condensate pump is recommended where gravity assisted condensate collection is not achievable 

-

 

Accessory supplied loose for fitting and wiring on site by others 

-

 

Pipework from pump to discharge not included 

-

 

Power can be provided by the Therm-X unit control panel (230V AC) 

-

 

Pump not suitable for external installation without additional weather protection 

-

 

For additional information please consult the 

Therm-X MVHRU Accessories Technical Manual 

 

 

Summary of Contents for Barkell Therm X HR95




























































Reviews:

No comments