AIREDALE Artus ARC66-21PE1H-7 Technical, Installation, Maintenance And Commissioning Manual Download Page 72

Page: 72 / 80

ARTUS™ Technical Manual 9690348 v3_04_2020

enan

Maintenance

Opening the Unit

Ensure the fan has stopped before lowering the hinged fan assembly fully.

CAUTION

1. Locate the latch side of the unit which can be

identified by the 2 larger 6mm holes in the fascia

panel.

2. A 4mm Allen key should be offered up to the unit

through the 6mm perforated holes in the fascia panel

and on to the hex socket on the latch housing.

3. Turn the latch mechanism through 90°. Repeat this

process on both corners of the unit.

4. Once both latches have been released, the hinged

fan assembly will drop on to the safety catch (blue

coloured part in diagram) which will trigger the fan

interlock and stop the fan from running.

5. The safety catch can then be released by moving the

catch away from the unit.

Ø1.5

4.0

Ø6.0

ARTUS™

Comfort

ARTUS™

Comfort

Summary of Contents for Artus ARC66-21PE1H-7

















































































Search results

Summary of Contents for Artus ARC66-21PE1H-7

Reviews:

Related manuals for Artus ARC66-21PE1H-7

Brands by name

Popular brands

AIREDALE Artus ARC66-21PE1H-7, Technical, Installation, Maintenance And Commissioning Manual

Search results

Summary of Contents for Artus ARC66-21PE1H-7

Reviews:

Related manuals for Artus ARC66-21PE1H-7

Brands by name

Popular brands