4
Welding the Bracket
1. Place the mounting bracket assembly on the top center of
the trunnion tube. Mark the center on the alignment tool and
ensure it lines up with the center mark on the trunnion tube.
2. Use C clamps to hold the bracket in place. Make sure you
leave the alignment tool in the bracket assembly while
welding.
Placing the Brackets on the Trunnion Tube
3. Tack weld all 8 corners of the base of the bracket.
4. Fillet weld a full bead on the edges of each bracket piece.
5. Allow the weld and the bracket to completely cool.
Alignment Tool
Summary of Contents for QuickLoad
Page 17: ...15 Notes ...
