Air Techniques, Inc.
Page 34
Important:
Before proceeding, make sure that the ProVecta is turned on
and connected to the new network adapter.
See page 6 of this document
to automatically configure the network
adapter with the
CrongIPC
program.
7.4 Manually
Configuring NIC.
Perform the following steps to
manually configure the
Ethernet card on the PC.
7.4a.
From the start menu, select
Control Panel
.
7.4b.
Observe that the
Control Panel window opens and select
Network Connections.
7.4c.
Observe that the
Network Connections
window opens. Click the appropriate
Local Area Connection
and select
Properties
from the resulting pop up window.
7.4d.
From the
Local Area Connection Properties
window, select the
Internet Protocol
(TCP/IP)
item
and click the
Properties
button to advance to the
Internet Protocol
(TCP/IP) Properties
window.
7.4e.
Configure the Ethernet card on the PC from
the
Internet Protocol (TCP/IP) Properties
window by inputting
10.42.43.15
for the IP address and
255.255.255.0
for the Subnet
as shown.
7.4f.
Check the connection to the ProVecta S-Pan by pinging 10.42.43.10. This is done via
the command console:
Start
>
run
>
cmd
and entering
ping 10.42.43.10
.
ADVANCED PROCEDURES
Network
Connections
7.4b
Control
Panel
Start
Button
7.4a
Summary of Contents for ProVecta S-Pan
Page 2: ......
