Air Techniques ProVecta 3D Prime, Operating Instructions Manual

Page: 12 / 160

8
2210200496L41 1904V004
Product description
3.3 Special accessories
The following optional items can be used with
the device:
Bottom wall bracket set, 16 inch,
short (wall/wall installation) � � � � � � � � � � � A7754
Fiber optic cable 5 m � � � � � � � � � � � � � � � A7757
Fiber optic cable 20 m � � � � � � � � � � � � � � A7758
Acceptance and consistency check
Test body set for Pano � � � � � � � � � � � � � � A7556
Consistency check test body 3D set � � � � A7759
Acceptance test body 3D � � � � � � � � � � � � A7760
Ball phantom � � � � � � � � � � � � � � � � � � � � � A7330
3.4 Consumables
The following materials are consumed during
operation of the device and must be re-ordered:
Hygienic protective cover bite block
(100 pieces) � � � � � � � � � � � � � � � � � � � � � � A7395
Cleaning and disinfection
Monarch surface disinfection wipes
(hundred pcs� - 7" x 9") � � � � � � � � � � � � � � H6171
Monarch enzymatic cleaner
(84�5 oz� bottle) � � � � � � � � � � � � � � � � � � � � H6201
Information on replacement part is avail-
able at the portal for authorized specialist
dealers:
www�airtechniques�com�
3.1 Scope of delivery
The following items are included in the scope of
delivery (possible variations due to country-spe-
cific requirements and/or import regulations):
ProVecta 3D Prime � � � � � � � � � � � � � � � � � A7750
– Fiber optic cable 10 m / 33 ft
– Exposure switch and holder
– Adapter for bite block
– Bite block
– Chin holder for edentulous jaws
– Chin holder for maxillary joint image
– Chin holder for sinus image
– Head supports with cushion
– Wall bracket top (16 in)
– Hygienic protective covers for bite block (100
pieces)
– Small parts set (e� g� screws, nuts)
– Operating instructions
– Installation instructions
– PCI Express frame grabber card
– USB dongle
– USB stick containing device-specific
calibration data
If the mains cable of this unit is damaged
it must only be replaced by an original
mains cable from the manufacturer�
3.2 Accessories
The following items are required for operation of
the device, depending on the application:
Hygienic protective cover bite block
(100 pieces) � � � � � � � � � � � � � � � � � � � � � � A7395
Positioning aids
Adapter for bite block � � � � � � � � � � � � � � � A7375
Bite block (3 pieces) � � � � � � � � � � � � � � � � A7395
Chin holder for edentulous jaws � � � � � � � A7390
Head supports Plus with cushion � � � � � � A7752
Cushion for head supports Plus � � � � � � � A7753
Chin holder for mandibular joint image � � � A7391
Chin holder for sinus image � � � � � � � � � � � A7392
EN
US
OBJ_DOKU-0000003575-mehrere-005.indd 8 17.04.2019 14:28:52