Preparing to Install
The nano Induct was designed to be simple and effective. Remove the unit, power
adapter, power cord, and mounting hardware from the box. We recommend keep-
ing the box and all packaging material for shipping the unit should it ever need to
be returned for repairs.
Installation Instructions
Installation and servicing of air-conditioning equipment can be hazardous due to
system pressure and electrical components. Only trained and qualified service
personnel should install, repair, or service air-conditioning equipment. Air Oasis
and its affiliates are not responsible for any damage to the HVAC system, nano
Induct or injury to yourself or others if you elect to install the device without utilizing
qualified technicians.
Use the suggestions on page 3 to determine the optimal mounting location(s).
To complete the installation process we recommend the following tools:
• Power Drill
• 3 3/4” inch hole saw
• 1/4 inch hex head screw driver
1. Cut a 3 3/4” hole in the duct where the device will be mounted. Center the hole
ensuring there will be at least a 5” diameter of duct around the outside of the hole.
3 3/4”
5”
4
2. We recommend leaving the UV Shields closed.
Should you choose to open the shields, place
one hand on the Distal Cap and the other on the
Outer UV Shield. Rotate the Distal Cap clock-
wise while rotating the Shield counter clockwise
until the desired position is reached. Rotation will
require firm pressure.
Outer UV Shield
Distal Cap
Ballast Cover
